83 included references from the KiCad Connector library. Open a source name to inspect its pin definitions, units, footprint field and datasheet link.
The list is ordered by source name and includes the complete published category. These are schematic-library references, not stock listings or tested DTU components. Shared pin labels do not establish compatibility.
Search all component references or read the snapshot provenance and license.
ATX Power supply 20pins
ATX Power supply 24pins
Atmel 6-pin UPDI connector
8-bit ISA-PC bus connector
16-bit ISA-AT bus connector
M.2 Socket 1-DP Mechanical Key A
M.2 Socket 2 Mechanical Key B
M.2 Socket 1-SD Mechanical Key E
M.2 Socket 3 Mechanical Key M
PCI bus connector for 5V cards
PCI bus connector for universal 5V/3.3V cards
PCI Express bus connector x1
PCI Express bus connector x4
PCI Express bus connector x8
PCI Express bus connector x16
Arm Cortex Debug+ETM Connector
Cortex Debug Connector, standard ARM Cortex-M SWD and JTAG interface
Standard IDC20 Pinheader Connector, ARM legacy JTAG and SWD interface
Tag-Connect ARM Cortex SWD JTAG connector, 6 pin
Tag-Connect ARM Cortex SWD JTAG connector, 6 pin, no legs
Microchip PIC In-Circuit Serial Programming/Debugging (ICSP/ICD) connector
ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART
3 pin connector, PD-30
3 pin connector, PD-30S
5-pin DIN connector (5-pin DIN-5 stereo)
7-pin DIN connector with pin 7 in center
Display port sink connector
Display port source connector
DVI-D dual link connector
DVI-I dual link connector
ExpressCard connector
HDMI type A connector
HDMI 1.4+ type A connector
HDMI type B connector
HDMI 1.3+ type C connector
HDMI 1.4+ type C connector
HDMI 1.4+ type D connector
HDMI type E connector
Nano-SIM Card (4FF) connector with Detect Switch
Micro SD Card Socket
Micro SD Card Socket with card detection pins
Micro SD Card Socket with one card detection pin
Micro SD Card Socket with two card detection pins
ACTEL FLASH PRO 3/4, JTAG, IDC10 Pinheader Connector
3-pin Mini-DIN connector
4-pin Mini-DIN connector
5-pin Mini-DIN connector
6-pin Mini-DIN connector
7-pin Mini-DIN connector
8-pin Mini-DIN connector
expansion header for Raspberry Pi 2 & 3
Raspberry Pi 4 Model B
RJ45 PoE 10/100 Base-TX Jack with Magnetic Module
1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX
1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX
RJ45 PoE 10/100 Base-TX Jack with Magnetic Module
Halo HFJ11, 10/100 Base-TX, two LEDs, RJ45, Shielded
Halo HFJ11, 10/100 Base-TX, no LED, RJ45, Shielded
Halo HFJ11, 10/100 Base-TX, no LED, RJ45, Shielded
1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX
1 Port RJ45 Magjack Connector Through Hole 10/100/1000 Base-T, AutoMDIX, 75W POE
1 Port RJ45 Magjack Connector Through Hole 10/100/1000 Base-T, AutoMDIX
1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX
LAN Transformer Jack, RJ45, 10/100 BaseT
LAN Transformer Jack, RJ45, 10/100/1000 BaseT
LAN Transformer Jack, RJ45, 10/100 BaseT
LAN Transformer Jack, RJ45, 10/100 BaseT, tab down
Dual LAN Transformer Jack, RJ45, 10/100/1000 BaseT
LAN Transformer Jack, RJ45, 10/100 BaseT
Connector array, 10x40, 1.27mm pitch, carrier-card, receptacle, gold finish, VITA 57.1 FMC, SMD
Connector array, 10x40, 1.27mm pitch, mezzanine-card, plug, gold finish, VITA 57.1 FMC, SMD
Tag-Connect’s 6-pins connector
Tag-Connect’s 10-pins connector
Tag-Connect’s 14-pins connector
Universal EXTension (UEXT) is a connector layout which includes power and three serial buses: Asynchronous, I2C, and SPI
Universal EXTension (UEXT) is a connector layout which includes power and three serial buses: Asynchronous, I2C, and SPI
USB Type-C Plug connector
USB 2.0-only Type-C Plug connector
USB Full-Featured Type-C Receptacle connector
USB Power-Only 6P Type-C Receptacle connector
USB Power-Only 24P Type-C Receptacle connector
USB 2.0-only 14P Type-C Receptacle connector
USB 2.0-only 16P Type-C Receptacle connector