140 included references from the KiCad Interface_USB library. Open a source name to inspect its pin definitions, units, footprint field and datasheet link.
The list is ordered by source name and includes the complete published category. These are schematic-library references, not stock listings or tested DTU components. Shared pin labels do not establish compatibility.
Search all component references or read the snapshot provenance and license.
Full/Low Speed, iCoupler USB Digital Isolator, 2.5kV protection
Full/Low Speed, iCoupler USB Digital Isolator, 5kV protection, SOIC-16
USB Type-C PD Sink Controller, QFN-24
USB Type-C PD3.1 Sink Controller, EPR/AVS up to 28V, SPR/AVS up to 21V, I2C interface, WQFN-24
Dual SPST USB 2.0 High Speed Switch with USB Battery Charging Specification Revision 1.2 Detection, UQFN-10
USB-PD & Type-C & Fast Charge Power Sink Controller, SOT-23-6
100W USB Type-C PD3.0/2.0, BC1.2 Sink Controller, SSOP-10
USB fast charging interface PD2.0/3.0, PPS, BC1.2 , QFN-20
USB QII wireless charging interface PD2.0, BC1.2, QII 5W, 7.5W, 10W, 15W, QFN-20
USB serial converter, UART, SOIC-8
USB HUB controller, QFN-24
USB HUB controller, QSOP-16
USB HUB controller, QSOP-28
USB serial converter, crystal-less, UART, SOIC-16
USB serial converter, UART, MSOP-10
USB serial converter, UART, SOIC-16
USB serial converter, UART, SSOP-10
USB serial converter, 2Mbps, UART, JEITA SOIC-8 (SOP-8)
USB serial converter, UART, SSOP-20
USB serial converter, 5V-tolerant IO, UART, MSOP-10
USB to UART / printer port / parallel port / 2-wire / 4-wire, SOIC-28 (SOP-28)
High-Speed USB serial converter, up to 6Mbps, 3.3V or 5V supply, UART, SOIC-16
High-Speed USB serial converter, up to 6Mbps, 3.3V or 5V supply, UART, QFN-16
USB to Quad Serial Ports Chip, LQFP-48
WCH-IC, Single-Chip USB-to-UART Bridge, USB 2.0 Full-Speed, 4Mbps UART, QFN-24
USB to UART bridge, WQFN-24
USB to UART master bridge, QFN-20
USB to UART master bridge, QFN-24
USB to UART master bridge, QFN-28
Single-Chip USB-to-UART Bridge, USB 2.0 Full-Speed, 2Mbps UART, QFN-24
Single-Chip USB to dual UART bridge, QFN-24
Full Speed Quad Channel USB UART/FIFO, integrated clock and EEPROM, QFN-64
HID USB to SMBUS master bridge
USB to I2S bridge, USB 1.0 Audio Class, QFN-32
USB-Serial single channel bridge with capsense and BCD, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422, QFN-24
USB-Serial single channel bridge with capsense and BCD, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/RS485, QFN-24
USB-UART LP Bridge Controller, full speed 12Mbps, +1.71V to 5.5V VDD, UART/RS232/RS422, SSOP-28
USB-UART LP Bridge Controller, full speed 12Mbps, +1.71V to 5.5V VDD, UART/RS232/RS422, QFN-32
USB-UART LP Bridge Controller, full speed 12Mbps, +1.71V to 5.5V VDD, UART/RS232/RS422/RS485, SSOP-28
USB-UART LP Bridge Controller, full speed 12Mbps, +1.71V to 5.5V VDD, UART/RS232/RS422/RS485, QFN-32
USB-Serial Dual Channel Bridge with CapSense Full-Speed 12 Mbps, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/JTAG, QFN-32
USB-Serial Dual Channel Bridge with CapSense, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/RS485/JTAG, QFN-32
USB Type-C port controller, Cortex®-M0 processor, UFP CC bootloader, QFN-24
USB Type-C port controller, Cortex®-M0 processor, DFP CC with opto coupler feedback bootloader, SOIC-16
USB Type-C port controller, Cortex®-M0 processor, DFP CC with opto coupler feedback bootloader, QFN-24
USB Type-C port controller, Cortex®-M0 processor, DFP CC with direct feedback bootloader, QFN-24
Stand-alone USB PD controller (with sink Auto-run mode), QFN-24
USB 2.0 High Speed 4-Port Hub Controller, SSOP-28
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch, MSOP-10
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) or UART Switch, MSOP-10
Full Speed USB to I2C Bridge, DFN-10
Full Speed USB to I2C Bridge, QFN-10
Full Speed USB to I2C Bridge, SSOP-16
Full Speed USB to 4-Bit SPI / FT1248 Bridge, QFN-16
Full Speed USB to 4-Bit SPI / FT1248 Bridge, SSOP-16
Full Speed USB to 8-Bit SPI / FT1248 Bridge, QFN-20
Full Speed USB to 8-Bit SPI / FT1248 Bridge, SSOP-20
Full-Speed USB to Basic UART, WQFN-16
Full-Speed USB to Basic UART, SSOP-16
Full Speed USB to Full Handshake UART, QFN-20
Full Speed USB to Full Handshake UART, SSOP-20
Hi Speed Single Channel USB UART/FIFO, LQFP-32
Hi Speed Single Channel USB UART/FIFO, LQFP/QFN-48
USB to Serial Interface, SSOP-28
Full Speed USB to Basic UART, WDFN-12
Full Speed USB to 8-Bit FIFO, QFN-24
Full Speed USB to 8-Bit FIFO, SSOP-24
Full Speed USB to 8-Bit FIFO, LQFP-32
USB 3.0 Super-Speed to 32 bits Sync FIFO, QFN-76
Full Speed Double Channel USB UART/FIFO, LQFP-48
Hi Speed Double Channel USB UART/FIFO, LQFP-64
High-Speed USB 2.0 Bridge, Type-C / PD3.0 controller, dual interface UART/FIFO/JTAG/SPI/I2C/bit-bang, VQFN-68
Hi Speed Double Channel USB UART/FIFO, QFN-64
USB 2.0 to Quad SPI or I2C Bridge, VQFN-32
Hi Speed Quad Channel USB UART/FIFO, LQFP/QFN-64
Programmable USB Type-C Controller w/PD, I2C address 0x23, WQFN-14
Programmable USB Type-C Controller w/PD, I2C address 0x24, WQFN-14
Programmable USB Type-C Controller w/PD, I2C address 0x25, WQFN-14
Programmable USB Type-C Controller w/PD, I2C address 0x22, WQFN-14
USB Type-C port controller with I2C and GPIO control, X2QFN-12
USB Type-C Port Controller with USB-PD, WQFN-16
USB 3.0 Dual LUN Memory Card Reader Controller, external firmware support (SPI Flash Memory), WQFN-48
USB 3.0 + USB 2.0 Differential Switch 2:1/1:2 MUX/DEMUX, WQFN-42
USB-PD Sink IC Port Controller, VBUS = 3..25V, USB Type-C rev. 1.4, USB-PD rev. 3.0, BC1.2, WDFN-10 / WSON-10
USB-PD Sink IC Port Controller, VBUS = 3..48V, USB Type-C rev. 2.1, USB-PD rev. 3.1, BC1.2, QC2.0, WQFN-16
USB TYPEC PD Controller Interface, TSSOP-16
USB 2.0 High Speed 4-Port Hub Controller, SSOP-28
USB 2.0 to UART Protocol Converter with GPIO, Extended Temperature Range, SSOP-20
USB 2.0 to UART Protocol Converter with GPIO, QFN-20
USB 2.0 to UART Protocol Converter with GPIO, SOIC-20
USB 2.0 to UART Protocol Converter with GPIO, SSOP-20
USB 2.0 to UART Protocol Converter with GPIO, Extended Temperature Range, TnR, SSOP-20
USB 2.0 to UART Protocol Converter with GPIO, TnR, QFN-20
USB 2.0 to UART Protocol Converter with GPIO,TnR,SOIC
USB 2.0 to UART Protocol Converter with GPIO, TnR, SSOP-20
USB to SPI Protocol Converter with GPIO, QFN-20
USB to SPI Protocol Converter with GPIO, SOIC-20
USB to SPI Protocol Converter with GPIO, SSOP-20
USB to I2C/UART Protocol Converter with GPIO, QFN-16
USB to I2C/UART Protocol Converter with GPIO, DIP-14
USB to I2C/UART Protocol Converter with GPIO, SOIC-14
USB to I2C/UART Protocol Converter with GPIO, TSSOP-14
USB charging port controller integrating QC 2.0/3.0 anc BC1.2 Protocol, TSOT-23-8
USB 3.0 HD Video Capture Chip, 24 MHz external clock, VQFN-64
High-speed USB On-The-Go ULPI transceiver
High-speed USB On-The-Go ULPI transceiver
Stand-alone USB PD controller (with sink Auto-run mode), QFN-24
USB-PD 3.1 controller with protection, Dual Role Power (DRP), OCP, OVP, WQFN-20
Integrated USB power Switch with Boost Converter, High-Efficiency Eco-mode Control Scheme, Texas S-PVSON-10
Integrated USB power Switch with Boost Converter, Constant Frequency, Texas S-PVSON-10
USB Dedicated Charging Port Controller
USB Dedicated Charging Port Controller
Dual channel precision adjustable current-limited power switches
Dual channel precision adjustable current-limited power switches
USB Type-C and USB PD Controller, Integrated Power Switches, QFN-38
USB-C / USB-PD 3.2 controller, moisture detection, programmable power-supply, WQFN-38
USB Type-C DFP Controller, integrated Power Switch, Load Detection, WQFN-20 (Texas RVC0020A)
ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, TSSOP-10 (Texas DGS0010A / VSSOP)
ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, UQFN-10
USB Type-C, SBU 3:1 multiplexer, 500MHz bandwidth, UQFN-16
USB Type-C, SBU 4:1 multiplexer, 500MHz bandwidth, UQFN-16
USB Type-C Configuration Channel Logic and Port Control, X2QFN-12
USB Type-C Configuration Channel Logic and Port Control, industrial temperature range, X2QFN-12
USB Type-C Configuration Channel Logic and Port Control with VCONN, X2QFN-12
USB-C / Display Port linear redriver/crosspoint switch
2- or 3-Port USB1.1 HUB with optional serial EEPROM
Four-port USB 2.0 Hub, TQFP-64
USB 3.0 xHCI Host Controller
four port USB 3.0 Hub
Four port USB 3.2 x1 Gen1 Hub
PCIe to USB 3.0 Host Controller, 2 ports, QFN-48
USB 2.0 4-Port Hub Hi-Speed Hub Controller
USB 2.0 Hi-Speed Hub Controller
Hi-Speed USB Device Transceiver with UTMI Interface, QFN-56
Hi-Speed USB Host, Device or OTG PHY with ULPI Interface
Hi-Speed USB ULPI Transceiver, QFN-24
Hi-Speed USB ULPI Transceiver, QFN-24
USB 2.0 Switch with ESD Protection, UQFN-10 Pitch 0.4 mm
USB 2.0 Switch with ESD Protection, UQFN-10 Pitch 0.5mm
USB 2.0 up to 12Mbps, Quad Channel USB UART/FIFO, RS485 capability, LQFP-64