How to plan a useful first prototype test
A useful prototype test starts with a question and an acceptance criterion. Specify what you will change, what you will measure and what conditions you will hold constant. Record observations and failures as well as successful trials, then use the evidence to choose the next design change.
Turn an ambition into a testable question
“Works well” is difficult to assess. “Can the enclosure be opened without removing the sensor cable?” gives a team a concrete observation to make. Choose a question the current prototype can answer, rather than expecting it to validate the entire product.
Define the conditions of the demonstration. A bench test, an outdoor trial and a classroom presentation may reveal different problems. Results should be described with those limits.
Write the plan before making the measurement
| Plan item | Example for a removable cover |
|---|---|
| Question | Can the cover be opened with the cable installed? |
| Acceptance criterion | Specify the required access and repeatability for your project. |
| Variable | Cover geometry or cable exit location. |
| Controlled conditions | Same frame, cable and installation method. |
| Observation | Interference location, opening sequence and damage. |
| Next decision | Retain the interface, change clearance or reroute the cable. |
Keep a short trial log
Use one row per trial with the revision, conditions, observation and any deviation from the plan. If you change two design features at once, record both; otherwise a later reader may attribute the outcome to the wrong cause.
Photographs are most useful when their filenames identify the test and revision. A short video may help document motion, while a sketch can make an interference point clear. Keep the original files so the summary remains traceable.
Make a decision without overstating the result
A passed trial supports a decision under the conditions tested. It does not establish lifetime reliability, field safety or performance in every environment. A failed test can be valuable when it identifies a specific design change.
End the test note with three statements: what was observed, what the team concluded and what remains uncertain. This keeps evidence separate from interpretation and provides a useful starting point for faculty or lab guidance.
Try the prototype BOM budget calculator with CSV export or browse the fabrication planning tools.
Related equipment at DTU
Review the equipment page and confirm the setup and access process with staff.