How to write a prototype project brief
A prototype brief should explain the problem, what the first version must demonstrate, the important dimensions and constraints, and how you will judge the result. Include a labelled sketch, the deadline and the specific help you need. A short, testable request is more useful than a broad project title.
Start with the decision the prototype will support
“Build a smart dustbin” describes a product idea, but not the uncertainty a prototype should resolve. A more useful first brief might ask whether a sensor can distinguish an empty container from a full one under the expected lighting and surface conditions.
Choose one decision for the first build: whether parts fit, a mechanism moves, a signal is stable, or a user understands the interaction. Keep aspirations for the final product in a separate section.
Include these seven fields
| Field | What to write |
|---|---|
| Problem | Who experiences the problem, in what setting, and what happens today. |
| First-version objective | One result you need to demonstrate. |
| Sketch and dimensions | Label interfaces, critical sizes, moving parts and any purchased components. |
| Conditions | Materials, environment, loads and space constraints that matter. |
| Pass/fail test | A measurable observation and the threshold you intend to use. |
| Resources | Existing files, parts, budget and team responsibilities. |
| Request | The specific fabrication, equipment or guidance you need and your deadline. |
Example: a mount for a small sensor
Suppose a team wants to mount a sensor on an existing frame. The first build does not need a finished enclosure. Its objective could be to check clearance around the cable, alignment with two mounting holes and whether the mount obstructs the sensor’s field of view.
Attach a sketch with the frame dimensions and the sensor datasheet. Identify which measurements you took and which remain assumptions. Request a review of the geometry before making the complete assembly. This is an illustrative planning example, not a tested DTU design.
Before sending your request
Keep one current brief and give it a revision name. If requirements change, mark the changed dimensions rather than sending several unexplained files. Equipment availability, access, scheduling and any charges must be confirmed with the lab.
- Save the brief and sketch with matching revision names.
- Separate measured values from assumptions.
- Ask a specific question the lab can answer.
- Use the published equipment catalogue and contact information to plan the next step.
Try the prototype BOM budget calculator with CSV export or browse the fabrication planning tools.
Related equipment at DTU
Review the equipment page and confirm the setup and access process with staff.