Convert filament length into estimated mass and raw material cost using your own material and price inputs.
Use the filament length reported by your slicer, rather than the object’s outside dimensions. This calculator treats filament as a cylinder and multiplies its volume by the density you enter. It estimates material only and is not a lab fabrication quote.
The prefilled figures are an example, not a supplier specification or a DTU price. Enter your own values.
Calculated in your browser. Inputs are not sent to the lab. This excludes machine time, electricity, labour, tax, delivery and failed prints.
Mass (grams) = π × (diameter in mm ÷ 20)² × length in metres × 100 × density in g/cm³.
Planned mass = mass × (1 + allowance ÷ 100). Material cost = planned mass ÷ 1,000 × your price per kilogram.
For an illustrative 10 metres of 1.75 mm filament at 1.24 g/cm³, the calculated mass is about 29.8 g. With a 10% allowance it becomes 32.8 g. At an example purchase price of ₹1,000/kg, that is about ₹32.81 of material. The example density and price are inputs, not verified specifications for your filament.
Add the result to a complete prototype BOM budget with CSV export, or browse all prototyping tools.
It does not calculate print time, machine charges, labour, energy, delivery, tax or the probability of a failed print. Slicer length must include supports, brims and purge material if you want those included. Use the material supplier’s density and measured diameter where available.
No. Infill percentage does not account for all walls, top and bottom layers, supports and other material use. Use the prepared slicer’s length or mass estimate for the intended setup. If your slicer already reports mass, raw material cost is that mass in grams divided by 1,000 and multiplied by your price per kilogram.
Next: prepare your CAD handoff, plan the prototype BOM or confirm lab access and charges.