Preparing CAD files for a 3D printing request
Send a clearly named model, state its units and expected overall dimensions, and identify the surfaces or features that must fit another part. Keep the editable CAD file as well as the exported model. Confirm the receiving operator’s preferred format and printer workflow before generating machine instructions.
Treat the file as a handoff
A model file alone rarely explains why a part exists. Include a small screenshot with critical features labelled, the intended use and the version you want fabricated. A part that is acceptable for a visual mock-up may not be suitable for a loaded assembly.
Tell the operator whether the part needs to mate with a measured component, leave room for cables, or be assembled after printing. This makes the design review more useful than asking only whether a file “can be printed”.
Keep geometry and setup information distinct
STL represents a model’s surface geometry. A slicer project such as PrusaSlicer’s 3MF project can retain models and the associated slicing setup. The editable CAD source serves a different purpose: it lets the design be revised without rebuilding it from an exported mesh.
Ask which deliverables the lab accepts. Do not assume that a project created for one printer is ready to run on a different machine.
| File or note | Purpose |
|---|---|
| Editable CAD source | Preserve design intent and make revisions possible. |
| Exported geometry | Share the intended shape in an agreed format. |
| Slicer project, if requested | Share a documented preparation setup. |
| Dimensioned screenshot | Explain units, size, mating features and priority surfaces. |
A pre-submission checklist
- Use a filename such as sensor-mount-r03, with the same revision on the drawing.
- State units and overall length, width and height in the accompanying note.
- Identify which features are essential and which can change.
- Check that you exported the intended body rather than an obsolete assembly.
- Review the model in the receiving software and check the resulting scale.
- Have the operator approve the actual machine setup.
Keep a record of the accepted version
After review, record what changed and keep the accepted file separate from working experiments. If the first print fails a fit or functional test, revise the design against that observation. Avoid overwriting the only record of the earlier geometry.
This guide covers preparation, not an assertion that a particular printer or file format is available at DTU. Check the published catalogue and confirm the workflow with the lab.
Sources and further reading
Try the prototype BOM budget calculator with CSV export or browse the fabrication planning tools.
Related equipment at DTU
Review the equipment page and confirm the setup and access process with staff.